Engineering Practice 1

ENG1901

This course is the first of a series of practice courses that are intended to enable you to acquire engineering and professional practice skills.

Availability

Our distance learning courses are offered throughout the year to help you fit study around your work and life commitments.
Courses are offered up to 12 times per year depending on demand and availability of academic staff.
Exact start dates are in the course information pages and in our Enrolment dates page:

Enrolment dates

Cost

Course costs can be found on all course pages. The fees may increase annually.
Qualification cost – to give you an idea of how much a qualification may cost in total over the duration of your studies, an approximate cost is provided for many of our qualifications. This is based on the required number of courses to complete the qualification and the average cost of those courses. It does not include annual administration fees, text books and course materials or external exam fees, and is subject to annual course fee increases.

Credits

Courses are assigned credits depending on how much time and effort is needed to complete their learning outcomes. In general, each credit represents approximately 10 hours of study time.

Delivery method

Online – The course materials for online courses are delivered in an online format and all assignments are submitted online.
Mixed – These courses are delivered using a mix of online and paper based course materials. This may include receiving paper course materials, submitting assignments online, or being required to participate in online forums and learning activities.
Print Only - The course will be delivered using paper based courses materials, and assignments may need to be submitted in hard copy rather than online. This will depend on the course.

Whether courses are delivered online, on paper or a mixture of both, there may also be components such as workshops, noho marae, work experience and practicum to participate in. To find out what your course involves check the course information page.

EFTS

EFTS stands for equivalent full-time student. An EFTS is the study time required for each course and is used by the Tertiary Education Commission to decide if a course is part-time or full-time.

One year of full-time study is generally between 0.8 and 1.2 EFTS.

Level

You can tell how hard a course or qualification is by the level it is set at:

Levels 1-4 are about the same as secondary school and basic trades training.
Levels 5-7 are the same as university study.

Prerequisites

Prerequisites are courses that must be completed before another course can be studied.
Co-requisites are courses that can be studied at the same time as another course.

If a course has a specific prerequisite or co-requisite course, it will be listed on the course page under the title 'Prerequisites'. If no courses are listed, check the entry and other requirements under the qualification you are studying for. Some courses require you to have studied at a particular level prior to enrolling.

Student loans

Not all qualifications or students are eligible for student loans. You will need to meet criteria such as studying a minimum number of credits over a specific study period. It is up to you to apply for a student loan via StudyLink - Open Polytechnic does not do this for you.

Information about student loans and eligibility

StudyLink website

Teaching weeks

Teaching weeks is the number of weeks that we teach a course. This differs from the enrolment period, which is based on the course start and end dates.

For example, a 20-week enrolment period will have 16 teaching weeks, followed by four weeks to accommodate marking, any extensions and reassessments, or exams.

Workload

The workload estimate given on a course page is calculated like this:

Number of credits x 10, divided by the number of teaching weeks for the course. The hours will be rounded up to nearest whole number.

Please note, this is a guide only. You may need more or less time for study, and you may also need to do more hours during assessment due dates or exams times.

Level
5
Prerequisites Check entry and other requirements under the qualification you are studying

Engineering practice skills, such as the ability to perform practical and project work, innovation, problem identification and solution, and engineering judgement, will be developed as you progress through your courses. This will be through activities such as laboratory design and project work.

Topics covered in this course include practical work primarily in the areas of:

instrumentational measurement
engineering materials
manufacturing.

What you will learn

When you successfully complete this course you will be able to:

demonstrate practical skills in selected technical fields
contribute as part of a team to complete a specific project in a specified time
prepare material for technical reports that demonstrates use of library and computing facilities
analyse scientific data and evaluate the experimental results obtained
contribute to the preparation of a report and the presentation of a seminar
apply basic health and safety principles in a workplace setting.

Assessment

This course is 100% internally assessed.

Travel to Australia

As part of this course you need to attend a practice unit at the University of South Queensland (USQ) in Australia. These units are held twice yearly in February and September.

Once you have decided on the practice unit you would like to attend we recommend you email us so we can arrange your placement with USQ on your behalf. Once we have confirmed your placement, we will notify you and then you can enrol in the course via our website.

beng.technology@openpolytechnic.ac.nz

Textbooks

There is a textbook needed for this course. Visit our textbook page for more information.

Textbooks

Computer and internet requirements

To complete this course you will need access to a laptop or desktop computer, reliable broadband internet connection and a data plan able to support online learning such as streaming of videos (including YouTube), downloading content, and writing and submitting online assessments. If you are unsure if your current computer or internet access allows you to complete your online learning with us, please contact us before applying to enrol.

Learn more about our online learning and study tools.

How to enrol

Before enrolling in this course you need to:

choose the qualification you will study the course under
check the order that courses in the qualification should be studied in the Qualification Structure table. This is in the Choose courses and apply tab on the qualification page.

Work towards

Course availability over the next 12 months

May

Jun

Jul

Aug

Sep

Oct

Nov

Dec

2025

Jan

Feb

Mar

Apr

Availability

Enrolment dates

Cost

Course costs can be found on all course pages. The fees may increase annually.
Qualification cost – to give you an idea of how much a qualification may cost in total over the duration of your studies, an approximate cost is provided for many of our qualifications. This is based on the required number of courses to complete the qualification and the average cost of those courses. It does not include annual administration fees, text books and course materials or external exam fees, and is subject to annual course fee increases.

Credits

Courses are assigned credits depending on how much time and effort is needed to complete their learning outcomes. In general, each credit represents approximately 10 hours of study time.

Delivery method

Online – The course materials for online courses are delivered in an online format and all assignments are submitted online.
Mixed – These courses are delivered using a mix of online and paper based course materials. This may include receiving paper course materials, submitting assignments online, or being required to participate in online forums and learning activities.
Print Only - The course will be delivered using paper based courses materials, and assignments may need to be submitted in hard copy rather than online. This will depend on the course.

EFTS

EFTS stands for equivalent full-time student. An EFTS is the study time required for each course and is used by the Tertiary Education Commission to decide if a course is part-time or full-time.

One year of full-time study is generally between 0.8 and 1.2 EFTS.

Level

You can tell how hard a course or qualification is by the level it is set at:

Levels 1-4 are about the same as secondary school and basic trades training.
Levels 5-7 are the same as university study.

Prerequisites

Prerequisites are courses that must be completed before another course can be studied.
Co-requisites are courses that can be studied at the same time as another course.

Student loans

Information about student loans and eligibility

StudyLink website

Teaching weeks

Teaching weeks is the number of weeks that we teach a course. This differs from the enrolment period, which is based on the course start and end dates.

For example, a 20-week enrolment period will have 16 teaching weeks, followed by four weeks to accommodate marking, any extensions and reassessments, or exams.

Workload

The workload estimate given on a course page is calculated like this:

Number of credits x 10, divided by the number of teaching weeks for the course. The hours will be rounded up to nearest whole number.

Please note, this is a guide only. You may need more or less time for study, and you may also need to do more hours during assessment due dates or exams times.

Level
5
Prerequisites Check entry and other requirements under the qualification you are studying